Feature highlights
Uniform detection magnetic field
Very high discrimination
Multi-Zone location and visualization of the detected weapons
Fast programming through an exclusive chip card system
Additional highlights
High Immunity to external interferences
Local or remote programming with networking capabilities
PMD2, acronym for Programmable Metal Detector, is the one of the most advanced CEIA applications with an international patent of its own. It generates an electromagnetic scanning field for the detection of metallic weapons inside a monitored passage. Thanks to this technology, the PMD2 Metal Detector allows weapons to be accurately located on people in transit, considerably speeding up search operations.
A “height on person“ display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of metal detectors with multiple receiver-transmitter coils, but are variable and continuous to achieve optimum resolution.
PMD2 panel version can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a power failure.
A photocell transit counter is available as an option. This will allow collecting statistical data on people passing through the metal detector. The metal detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The PMD2 is manufactured using the most advanced electronics technology, conforming to ISO 9001 quality control standard procedures.
|
Specifications |
|
Power supply |
115 / 230 VAC +/-15%, 45 - 65 Hz, 30 VA MAX |
|
External interface |
RS-232C interface for terminal, computer, external modem or other CEIA metal detectors. |
|
Operating temperature |
from -15°C to +50°C |
|
Relative humidity |
0 - 95% (non condensing) |
|
Certification and conformity |
Certificate of harmlessness to wearers of pacemakers, sick people, pregnant women, etc.
Non damaging to magnetic media (floppy disks, tapes, etc.)
Conforms to all levels of the NILECJ-0601 standards.
Conforms to the specifics of the „3-Gun-Test“.
Conforms to the international standards currently applicable for electrical safety. E.M.C. and to the applicable CE-Regulations.
Approved for the use by ministries and government bodies. |
|
Alarms |
Location luminous bar
built into the antenna (20 zones indication)
Optical & acoustic signalling
constant or proportionate to the mass in transit
Output
relay with 1A-230Vac exchange
Reset
automatic or manual
Alarm inhibition
INI input with N.O. contact |
本月特價(jià)
終身維修
分享儀器
隱藏對比框