產品描述:
CONSTANT TEMPERATURE VISCOSITY BATH
NVS 210
運動粘度測定浴槽 NVS 210型
符合測試標準 ASTM D445、IP 71、ISO 3104、DIN 51366
本測試方法是通過測定一定體積的待測液體樣品在重力作用下流過一支經校準過的玻璃毛細管粘度計的時間來測定該樣品的運動粘度。它適用于測定透明和不透明的液體石油產品的運動粘度。
浴槽被設計成長方形浴室,浴槽開口尺寸為260x240mm,容積40L,可同時放6支標準的毛細粘度計。
溫度范圍:室溫~150℃,通過外接低溫冷?。ㄟx配)實現測試溫度保持在40℃以下。
旋轉開關輕松實現溫度控制。
獨有的自由移動轉盤,使每只毛細粘度計都能位于操作者面前,便于觀察。
通過與微處理器模塊相連的PT100 溫度傳感器進行溫度調節控制。
先進的電子控制系統能夠連續計算最適宜的輸入功率,從而實現最佳的溫度控制精度和穩定性。
LCD顯示屏顯示浴槽溫度。
實際溫度設定通過控制器控制,精度0.01℃。
NVS210型水浴能夠通過主機背面的排水裝置排空,易于清潔維護。
低液位和溢出報警,操作更安全。
可設定最高溫度,儀器自動斷電保護。
溫度設定精度0.01℃,溫度穩定性0.02℃,一致性0.02℃,滿量程溫度線形偏差0.2℃。
儀器配1500+500W的浸沒式電熱器,主機最大功率2100W。
電 源:230V/50HZ(根據需要,可改換為其他電壓/電流)
外部尺寸:(W)352 x (L) 510 x (H) 590mm
重 量:80Kg
Main caracteristics
Viscosity bath – 40 litres – 6 positions
Temperature from Ambient to 150°C – Can be connected to a cryostat for temperature below 40°C.
Easy temperature control through a turn-
push button.
The bath features a unique turntable for maximizing tube position in the bath and the operator’s ease of use.
The bath temperature is regulated using a PT-100 temperature probe connected to a microprocessor module. The advanced electronic control system continually computes the energy input required for optimal temperature accuracy and stability. Temperature read-out is on a LCD display. The actual set point is computed within the controller with an accuracy of 0.001°C.
Security
NVS 210 bath can be emptied via a drain located at the backside of the equipment and makes the cleaning easy.
Low level & overflow safety
Maximum temperature can be set with automatic cut off.
Additional informations
Dimensions : LxWxH in mm : 510 x 352 x 590
Weight : 80 Kg
Ref 23210 : NVS 210 230V / 50 Hz
Ref 23210/115 : NVS 210 115V / 60 Hz
230V / 60 Hz on request
技術參數: