I-EXP便攜式多功能輻射檢測儀

1.檢查局部的輻射泄露和核輻射污染；
2.檢查周圍環境的氡輻射；
3.檢查石材等建筑材料的放射性；
4.檢查有核輻射危險的填埋地和垃圾場；
5.檢測從醫用到工業用的X射線儀器的X射線輻射強度；
6.檢查地下水鐳污染；
7.檢查地下鉆管和設備的放射性；
8.監視核反應堆周圍空氣和水質的污染；
9.檢查個人的貴重財產和珠寶的有害輻射；
10.檢查瓷器餐具玻璃杯等的放射性；
11.精確定位輻射源；
12.家居裝飾的檢測。

    技術性能
1、探測器：G-M 計數管,有效直徑45mm,云母窗密度1.5-2.0mg/Cm3;
2、選配探頭:外接閃爍探頭。
3、效率（4π） 
4、γ靈敏度：對Cs-137源為5.8Cps/μSv/h;探測下限：對I-125是0.02微居。
5、能量響應：最低能量響應≥20Kev，對Cs-137源為5.8Cps/μSv/h;
6、探測下限：對I-125是0.02微居;
(注：詳細資料見英文說明書，以英文說明書為準。)
7、顯示：四位數字液晶顯示（包含對各種方式和標志符顯示）。
8、平均周期 每3秒鐘更新一次顯示，在正常輻射水平下給出過去30秒鐘內的平均值；隨輻射水平的增加，平均周期可減少。參看 “自動換量程”與“顯示更新”。

    測量范圍：
0.001-100mR/hr         0.01-1000μSv/ hr        
0.01-1000μSv/hr           0-300000 CPM      0-5000CPS    1-9999000 總計數  

以10分鐘的增量設置10-50分鐘內的取樣周期；
以1小時的增量設置1-24小時內的取樣周期；
CAL系數 001-199范圍。

    精  度：μSv/h：≤500μSv/h；范圍時≤15%，在500-1000μSv/h范圍≤20%；
CPS：≤2500 CPS范圍時≤15% ， 在2500-5000CPS范圍≤20%；

   溫度范圍：-10-+50℃
    供  電：9V堿性電池，在正常本底下工作200小時，在10μSv/h下工作24小時；
    尺  寸：150×80×30mm;
    重  量：272g（含電池，不含外接探頭）

The Inspector EXP
External Probe Surface Contamination Monitor
The Inspector EXP is designed to meet the requirements of emergency response personnel. It has the same valuable features, small size, and quality of the Inspector, but instead of the built-in detector, it has the added versatility of an external probe.
The carrying case has a clear window panel that provides a full view of the readout and count light and access to the switches. It includes convenient hand straps and a belt loop for carrying the instrument and a small pocket for a check source.
The probe can be attached to the carrying case for one-handed operation if desired. The protective probe cover folds easily out of the way during one-handed operation.
Specifications:
Same as Inspector (below) except for external probe:
RAP-RS1 Probe:
Detector: Same as Inspector Alert (below)
Enclosure: Anodized aluminum housing with coated, black foam grip
Power supply: 500-volt, in the probe head
Size: Approx. length: 22.2 cm (8.75 in.) Diameter: 7 cm (2.75 in.)
Connector: Amphenol tuchel connectors
Inspector specifications:
Detector:
Halogen-quenched Geiger-Mueller tube.
Effective diameter 1.75" (45 mm).
Mica window density 1.5-2.0 mg/cm2.

Display: 4-digit liquid crystal display with mode indicators

Operating Range:
mR/hr: .001 to 100.0
CPM: 0 to 300,000
mSv/hr: .01 to 1,000
CPS: 0 to 5,000
Total: 1 to 9,999,000 counts

Gamma Sensitivity:
3500 CPM/mR/hr referenced to Cs-137
Smallest detectable level for I-125 is .02 mCi at contact

Efficiency: For 4 pi geometry at contact

Beta
C-14 (49 keV avg. 156 keV max.): 5.3%
Bi-210 (390 keV avg. 1.2 MeV max.): 32%
Sr-90 (546 keV and 2.3 MeV): 38%
P-32 (693 keV avg. 1.7 MeV max.): 33%

Alpha
Am-241 (5.5 MeV): 18%

Averaging Periods:
Display updates every 3 seconds, showing the average for the past 30-second time period at normal levels. Averaging period decreases as radiation level increases. User can select fast 3-second averaging period.

Timer: Can set 1-10 minute sampling periods in one-minute increments, 10-50 minute sampling periods in 10-minute increments, and 1-24 hour sampling periods in 1-hour increments

Alert:
Beeper sounds the alert
User-adjustable alert level is set using three buttons

Accuracy: ± 15% up to 50 mR/hr; ± 20% up to 100 mR/hr

Anti-Saturation: Readout holds at full scale in fields up to 100 times the maximum reading

Temperature Range: -20o to +50o C, -4o to 122o F

Power: One 9-volt alkaline battery; battery life is average 2160 hours at normal background, average 625 hours at 1 mR/hr with beeper off

Size: 150 x 80 x 30 mm (5.9" x 3.2" x 1.2")

Weight: 350 grams (11.4 oz) including battery

I/O Ports: Stereo 3.5 mm jack for CMOS or TTL devices – sends counts to computer or data logger. Mono 2.5 mm jack provides electronic calibration input.

Count Light: Red LED flashes with each radiation event

Audio: Beeper beeps with each radiation event; can be muted

Options: Wipe test plate